Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Thule Fat Tire Kit for T2 Racks
$69.95
With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.
Thule One-Key Lock Cylinders (6-pack)
$75.00
Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.
Thule ProRide Fat Bike Adapter
$50.00
An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes
Sunlite DLX Cross Bar Adapter
$52.00
- Adapts female specific and full suspension frames to be easily hung on car rack carriers - Locking ends ensure a firm hold on the bicycles seat tube and head tube for a secure fit - Makes transporting an unconventional frame by car rack much easier - Extends from 21.5" to 31" eye to eye
Saris Bike Beam
$50.00
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris Freedom Fat Tire Wheel Holders
$51.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Saris Hatch Huggers
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Saris Hitch Tite
$14.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris Locking Hitch Tite (Threaded)
$40.00
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
RockyMounts Thru Axle Adapter Sleeve
$9.95
Thru axle adaptor sleeve for StreetRod, HotRod & SwitchHitter. Simply loosen the screws, remove your existing axle and slide this in.
Kuat 1.25-inch to 2-inch Adapter
$30.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.
Kuat Access Bike Ramp for NV 2.0 Family
$98.00
The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.
Kuat Hi-Lo
$69.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
Kuat Hi-Lo Pro
$119.00
The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only
Kuat Transfer Lock Kit
$39.00 - $49.00
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Kuat Trio Fork Adapter
$19.00
Thru-axle adapter for the Kuat TRIO rack.
Allen Adapter Bar
$30.00
Allen's Adapter Bar allows full suspension bikes and non-conventional frames to be used on your Allen rack. An internal spring mechanism maintains constant tension to keep your frame secure. Plus, the plastic coating protects your bicycle's finish.
Sunlite Crossbar Adapter
$44.49
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
Saris Locking Cable 8'
$44.99
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Saris Protect-O-Pads
$19.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Saris Superclamp HD 2-Bike 2-inch Tilting Hitch Base
$179.99
An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.
Saris Swing Away Accessory
$349.99
Swing into Action Turn your Saris hitch rack into a swing away with this hitch rack accessory. Featuring 90° of pivot, the Swing Away Accessory gives you free and clear hatch access without removing your bikes. Designed to handle up to 250 lb. of rack plus bike weight, the Swing Away Accessory is compatible with our most popular hitch racks – including the Freedom and SuperClamp platform hitch racks. Convenient and built-in carrying handles make it easy to maneuver and install, while the included Hitch Tightener ensures secure travels down the road. For those times when only a swing away will do, there’s the Saris Swing Away Accessory. Product Features - Turns your favorite Saris hitch rack into a swing away. - Pivots 90° and locks in open position. - Carries up to 250 lb. of rack + bike weight. - For use with 2” receivers only. - For specific rack model compatibility see specifications below. Rack Compatibility - Compatibility information for Saris hitch racks - Compatible with bikes up to 35 lb. per bike tray for the following models: - SuperClamp EX 2-Bike (4025F) - SuperClamp HD 2-Bike (4025HD) - Freedom EX 2-Bike (4412F) - Freedom 2-Bike (4412B) - Glide EX 4-Bike (774) - Compatible with bikes up to 60 lb. per bike tray for the following models: - MTR 1-Bike (4031) - MTR 2-Bike (4032) - Tilting/folding feature of Freedom, SuperClamp or MTR racks can be used when on the Swing Away Accessory in the "closed" position. - Gliding feature of the Glide EX is not recommended when installed on Swing Away in the "closed" or "open" (swung away) position. - Check with your hitch rack manufacturer (non Saris) to see if your existing hitch rack can be used with extenders. Product Design - Swings away to 90° for full vehicle hatch access. - For use with 2” receivers only. - Weight capacity: 250 lb. (rack, plus bikes). - Hitch Tightener system securely locks hitch into place, securing the base to your vehicle. - Two integrated carrying handles.
Saris Wheel Straps (2-Pack)
$14.99
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
RockyMounts Lock Core
$14.95 - $39.95
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
Delta Crossbar Substitute
$34.99
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
Page 1 of 1