Parts & Accessories
Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.
Keep your favorite lights running bright with Serfas' Bat-4 Replacement Battery. It is included with TSL-2500 and TSL-Police lights but fits several other models as well.
Piggyback (Triple Cell) Piggyback batteries give you peace of mind for safety and security by extending your burn times. The Piggyback battery works by recharging the light as you use it. If plugged in when the light unit is fully charged, all the light modes are available. If the light's internal battery is below 50% charge then only medium and low settings will be available when the Piggyback battery is connected. Machined plastic case with connector and fitting parts. Weighs 210g
Keep your favorite lights running with Serfas' Bat-2T Replacement Battery. More than just a battery, it can also act independently as a 35 lumen Thunderbolt LED Taillight. As a rear light it has a capacity of 3300 mAh, and 6600 mAh as a battery.
Lezyne's Infinite Light Power Pack is a portable power pack that doubles runtimes of compatible Lezyne LED units. Compact, versatile design quickly and securely mounts to bars and frames. Integrated cable plugs directly into lighting systems. Power pack doubles as a backup USB charger for compatible USB rechargeable accessories. 20 Wh capacity. 14-inch cable with adjustable Velcro strap.
Keep your favorite lights running with Serfas' Bat-2S Replacement Battery. • Fits TSL-LT1000, TSL-1800, TSL-1200, TSL-2500, TSL-1000, TSL-1500, TSL-1000+, TSL-1500+, TSL-T1000, BAT-ADT • 2600 mAh Capacity
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.
Piggyback (Single Cell) Piggyback batteries give you peace of mind for safety and security by extending your burn times. The Piggyback battery works by recharging the light as you use it. If plugged in when the light unit is fully charged, all the light modes are available. If the light's internal battery is below 50% charge then only medium and low settings will be available when the Piggyback battery is connected. Machined plastic case with connector and fitting parts. Weighs 78g
Light & Motion's 7.4v 2-cell Li-ion Battery is compact and lightweight to power your light without weighing you down. It slips into a jersey pocket or pack or attaches to your bike via the convenient integrated rubber strap.
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
Keep your favorite lights running with Serfas' Bat-1 Replacement battery. Thanks to its 3300mAh capacity, you'll have plenty of power for all your night activities.
Keep your favorite light running with Serfas' RB-LI+ Replacement Battery. This Lithium-ion battery compatible with Serfas' True 150+, 250+, and 500+ lights.
$20.00 - $32.00
Replacement battery for 2019 True Series MTB & Road headlights. Plastic storage case included.
Replacement Battery – TSB-S Replacement Rechargeable Battery - Battery: 1-Cell Li-Ion, 1400 mAh - Fits: TSL-450F, TSL-700F
Quick Release (QR) Bracket explained Fits all 2007-2012 Exposure Lights Maxx D, Enduro, Toro, Race, Strada, & Six Pack. The bracket comes with a sizing ring and fits all bars 25.0mm (STD) - 31.8mm (O/S) When the light is attached to the bracket a 4mm Allen Key can be inserted beneath to adjust it to your perfect angle. Weights: 26g - 25.4mm (STD) 22g - 31.8mm (O/S)
Helmet Mount bracket kit Ball joint for precise positioning, weighs 18g Injection moulded plastic Fits Diablo / Joystick / Spark
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights
The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Do you have more than one bike? Get the most out of your Flux 900 headlight by getting an additional handlebar mount for easy switching between your rides. - Includes one piece axle and handlebar clamp. - The clamp will fit 25.4mm and 31.8mm bar diameters with included rubber grip pads.
The ultimate mounting solution for the Vibe Pro Taillight. Securely mount Vibe to seat rails placing rear lighting at the highest part of the bike - optimum for visibility to motorists. Innovative design allows the Vibe to be adjusted in multiple angles for ideal placement. Additionally this mount solves common mounting issues when using an aero post, trunk bag, etc. Features - Higher mounting point increases rear visibility - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Optimized for the Vya Pro Taillight for a sleek mounting orientation. The standard Vya Taillight is compatible but may interfere with accessories such as a seat bag
- The Gino Light Mount is a small perch that allows lights to be mounted to any M5 threaded eyelet, rack mount or braze-on - Made in USA
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Extend your light's runtime with Serfas' BAT-ADT Replacement Battery. It allows up to 4 times the runtime when used in place of internal battery and connected to BAT-4 (sold separately).
Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Lezyne's Aluminum Helmet Mount is a durable accessory for Lezyne Mini XL, Power XL, Super XL, Deca, and Mega Drive lights. It has a stamped and machined aluminum base plate, a compression ring, a Composite Matrix spherical pivot, cradle and a Velcro strap which attaches the mount to the helmet. The spherical pivot allows the user to adjust the position of the light in all directions.
The NiteRider Lumina Series Photo Pack gives you the ability to use your Lumina headlight in a whole new way! Light up your scene using the Hot Shoe Mount, Tripod/Magnet Mount, and Light Diffuser. The Lumina makes a great hand held light in Walk Mode. This accessory pack includes a durable Belt Clip that attaches to your Lumina, allowing you to conveniently carry your light hands free. With the Magnet Mount, you’ll be able to stick your Lumina onto metal surfaces. Ideal for when working under the hood of your car/truck or in and around the house, adding to the Lumina’s versatility. - For Lumina Light Heads only - Light Diffuser will not fit Lumina Micro - Hot Shoe Mount - Tripod/Magnet Mount (1/4" x 20 thread) - Belt Clip - Light Diffuser Lumina Headlight sold separately
Helmet mount for all systems that use the slider mounting clip System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
Page 1 of 3 Next page