Parts & Accessories
XLAB's Sonic Wing Dual Bottle Rear Carrier fits perfectly in seatposts with 2 6mm holes and lets you carry your gear behind you tucked out of the wind. This versatile carrier gives you options galore so you can easily attach what you need for any length ride. You also have 30 different mounting options and can keep it upright for low drag or invert it for easy access. And, since it attaches to the seatpost, the Sonic Wing works with most seats too. Its aluminum construction means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps. Compatible with Cervelo seatposts with two 6mm holes as well as the new QR PR6.
Fits between cage and frame and allows water bottle cage to twist sideways for easier bottle removal and replacement. Works with most Topeak water bottle cages. - Material: Engineering grade plastic - Size: 7.9 x 2.5 x 1.5 cm / 3.1” x 1” x 0.6” - Weight: 25 grams
Mount 1 or 2 bottle cages to your saddle with the Tacx Saddle Clamp. It's choice of triathlon and time-trial cyclists where aerodynamics is key. Adjust the angle and height to your preference for an optimal reach.
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
$6.99 - $18.99
- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included
Hydrapak's 36-Inch Tube Brush will help you keep your hydration pack hoses clean for crisp, clear water.
CamelBak's Antidote Cleaning Kit keeps your hydration system clean and free of nasty tastes and odors. It includes two brushes: a tube brush for scrubbing the full length of the delivery tube and an effective, corner-reaching reservoir brush. Plus, the two Cleaning Tablets work in just 5 minutes to thoroughly clean your reservoir. Extra drying arms lock the reservoir open and you get a Reservoir Dryer that clicks into your bladder, letting it drain and dry after you've cleaned it.
The Antidote Insulated Tube upgrades any CamelBak system to handle extreme winter and summer conditions. It includes: a Big Bite Valve mouthpiece, a Quick Link connector, an insulated tube cover and PureFlow delivery tube.
The Antidote Insulated Tube Director upgrades any CamelBak system to handle extreme winter and summer conditions, while providing the added benefit of hands-free drinking. That's right, this helpful add-on has a semi-rigid design that holds your drinking tube in the perfect position. Plus, the kit includes a Big Bite Valve mouthpiece, a Quick Link connector, an insulated tube cover, and PureFlow delivery tube.
CamelBak's Antidote Reservoir ensures easy hydration. Its polyurethane reservoir features laser-welded seams for incredible strength with minimal weight. A wide mouth-opening makes filling, cleaning, and adding ice simple, while the quarter-turn cap seals with a click and re-opens effortlessly. An internal center baffle distributes fluid and weight evenly. Camelbak’s Quick Link system has an auto-shut off mechanism so you can disconnect the hose for hassle-free refills. The Antidote also features hidden dryer arms that hold the reservoir open after cleaning.
Probably the easiest way to clean your reservoir, CamelBak's Cleaning Tablets work in just five minutes. They prevent bacteria buildup, odor, and get rid of bad taste. One tablet cleans a 100-ounce reservoir.
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
- Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in
The CamelBak Crux replacement tube has larger diameter and offers more water per sip than previous tubes. Pair with the Crux reservoir on/off valve (sold separately) for 20% more water flow per sip.
The Crux reservoir on/off valve pairs with CamelBak's Big Bite valve and tune. Using an integrated valve, water flow shuts off for added security during transport.
CamelBak's Ergo HydroLock controls your fluid flow with the flip of a switch. Turn it on to drink, turn it off for added security during transport. Simply insert it into the end of your CamelBak drinking tube and attach the valve to the other end. Plus, the 90-degree bend makes sipping on the go a cinch!
Don't let a rainy day ruin your ride and soak the contents of your pack. Pick up CamelBak's M.U.L.E. Rain Cover! A hook and loop closure and a drawstring secure it over your hydration pack, keeping your gear safe and dry.
CamelBak's Magnetic Tube Trap keeps your hydration hose bite valve right where you need it for hydration on the go. Pull it off, take a sip, and pop it back so it's always where you want it. It fits any CamelBak reservoir hose.
$14.00 - $16.00
Don't let a rainy day ruin your ride and soak the contents of your pack. Pick up CamelBak's Rain Cover! A hook and loop closure and a drawstring secure it over your hydration pack, keeping your gear safe and dry.
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.
All metal cup made of 304 Stainless Steel.
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
- Individually packaged - Enables mounting of a bottle cage in a variety of positions - Fits 22.2-26.0mm handlebars
Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.
BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates
Page 1 of 1