Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Wahoo RPM Speed Sensor (BT/ANT+)
$39.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
Wahoo Extended Battery
$59.99
Tired of your iPhone battery dying on long rides? Wahoo's Extended Battery works with any of Wahoo’s line of bike cases to add an extra 150 percent of battery life to your iPhone while you ride. • Adds additional 5+ hours of ride time: 2.3 Amp Hours (actual increase varies depending on iPhone model, App used, and other factors) • Piggybacks on the back of any of Wahoo’s line of bike cases • Mounts using the standard Wahoo Bike Mount or Aerobar Mount (each sold separately) • Rechargeable via USB • Water and shock proof: IPX5 Certified • Weight: 109 grams
Wahoo RPM Speed/Cadence Sensor Combo Pack (BT/ANT+)
$70.00
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Wahoo Bike Pack
$129.99
With Wahoo's Bike Pack, you can pair any bike sensor through ANT+ wireless technology with your favorite cycling app to see speed, cadence, power, distance, GPS maps, and more. It includes Wahoo's Bike Case and Speed/Cadence sensor. Wahoo's Bike Cases protect and transform your iPhone into a powerful cycling computer: • Protects your iPhone: IPX5 waterproof certification and rugged shock resistant construction • Mounts your iPhone to handlebars or stem while you ride • Compatible with Wahoo Extended Battery and Wahoo Aerobar Mount (sold separately, not compatible with PROTKT) • Works with all types of bikes - road, mountain, e-bikes, and hybrid • Fully accessible and functional touch screen • Low-energy and does not require charging • Weight: Bike Cases: 128 grams, S/C Sensor: 30 grams
Topeak BarXtender
$20.00
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Topeak RideCase Center Mount w/SC & G-Ear Adapters
$49.95
Symmetry is a beautiful thing. This RideCase mount brings everything in line, front and center to offer easier viewing of your device, a perfectly centered video frame, or a light beam cast in the center of your route. Attaches to 31.8mm diameter handlebars and the QuickClick holder can be rotated for both portrait and landscape orientation. The included sport camera adapters are compatible with different sport cameras like GoPro Hero series, Sony Action Cam series, Shimano Sport Cameras, and Garmin VIRB X / XE. Includes G-Ear Adapter for Garmin cycle computer. - Material: Forged aluminum / Engineering grade plastic - Bracket: For Handlebar (fits 31.8mm) - Max Load: Sport camera 200 g / 7.04 oz - Added Features: Angle adjustment (Sport Camera) Rotates for landscape or portrait viewing (RideCase) - Compatible with RideCase series & PanoComp X Includes T15 wrench - Size: 11 x 6.6 x 4.7 cm / 4.3” x 2.6” x 1.9” (Center Mount only) - Weight: 36 grams
Sigma Sport Cadence Disc Pedal Magnet
$5.99
The cadence magnet pedal insert is designed for tight installation situations. The principle is simple, yet space-saving: the power magnet attaches to any steel pedal spindle by magnetic force alone. From there, it triggers the cadence transmitter with each crank revolution.
Sigma Sport Cadence Sensor Kit For Universal Mounting Bracket
$7.99
Cadence sensor kit for Universal bracket only. * Note: mount sold separately
Sigma Sport DTS Wireless Transmitters
$30.00
- Digital Transmitter System (DTS) wireless transmitter replacements for post-2005 Sigma wireless head units - There is no wired-to-wireless conversion for 2006+ wired models
Shimano BT-R1A External Di2 Battery
$110.00
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Shimano BMDN100 Di2 Long Battery Mount for External Wiring
$124.99
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Saris BLE USB Adapter for PC
$29.99
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
SRAM eTap BlipClamp
$16.00
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
SRAM eTAP Battery Charger
$45.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTap Battery
$55.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTAP Powerpack
$77.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.The eTAP Powerpack includes a battery charger, cord, transmitter, and international adaptors (US/EU/GB).
SRAM RED eTap Blips
$110.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
SRAM RED eTap Bar End Clic Shift Buttons
$120.00
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
SRAM eTap AXS BlipBox
$385.00
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame
Rokform iPhone Bike Mount
$99.00
Rokform's iPhone Bike Mount is a rock solid system that is completely adjustable—offering stable, safe, and completely hands-free visibility and access for your iPhone. Rokform's CNC-machined aluminum-billet case provides a light, tough landing pad for your phone. And, their Universal V.3 Bike Mount replaces your stem cap to quickly attach to any 1-1/8-inch fork. The mount's viewing angle is adjustable from -22 to +55 degrees, so you're sure to find the perfect perspective. The included safety lanyard offers another layer of security for your phone. The kit also includes Rokform's V.3 Magnet Kit, which lets you stick your phone to any magnetic surface, and their RokSack all-weather protective cover. iPhone Mount for 6, 5/5s, 5c, 4/4s includes: • Machined 6061 T-6 aluminum-billet phone case • Universal V.3 Bike Mount • V.3 Magnet Kit • RokSack weather-guard protective cover • Dual retention locking system
Profile Design UCM XL Universal Computer Mount 60mm
$11.00
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design UCM Universal Computer Mount 25mm
$12.00
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Origin8 Computer Wiring Kits
$6.80
Replace your worn or damaged wiring on Origin8 wired computers (97517 / 97570) - Includes bracket with (155cm) wired sensor, screw magnet and 4 cable ties - Includes: Wiring Kit - Compatibility: Data Station 8 / 10 ** HEAD mount is HANDLEBAR mount only (not stem)
Origin8 Outpost Direct GoPro Mount
$24.00
- CNC machined AL6061 alloy GoPro mount for handlebars or seatposts - Accepts GoPro mounting style compatible accessories - GoPro mount rotates 90° for ideal positioning of accessories - Fits 22.2mm, 25.4mm, and 31.8mm handlebars with included adapter - Fits 27.2mm, 30.9mm, and 31.6mm seatposts with included adapter
Origin8 Outpost Garmin Stem Mount
$24.00
- CNC machined AL6061 alloy Garmin stem mount - Mounts to a stem`s faceplate by means of two included M5 x 18mm stem bolts - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000
Origin8 Handlebar Mount for Garmin Computers
$24.65
• Handlebar mount for Garmin Edge 200, 500, and 800 • Fits handlebars 22.2 to 31.8mm (Shims included) • Forged and CNC`d alloy construction
Origin8 Outpost Garmin/GoPro Stem Mount
$31.00
- CNC machined AL6061 alloy Garmin/GoPro stem mount - Mounts to a stem's faceplate by means of two included M5 x 18mm stem bolts - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000 - Accepts GoPro mounting style compatible accessories
Minoura SGS-400-STD Clamp
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
Lezyne Cadence Speed Flow Sensor
$44.99
Advanced 2-in-1 speed and cadence sensor. Conforms 100% to Bluetooth Smart standards for max compatibility. Powerful rare earth magnet provides wider engagement spacing. Durable, lightweight polycarbonate construction with translucent body and LED indicators. Adjustable swingarm and versatile mounting system. Replaceable CR2032 coin cell battery optimized for long-lasting use. Includes O-ring mounts, spoke magnet, crank arm magnet.
Knog PWR Rider
$65.00
PWR Rider is a 450 lumen bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; has a 2 hr runtime at max 450 lumens and 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. The two “Charger” lights come with 5 pre-programmed modes, just in case you haven’t yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens, and for those with stamina, will run at 200 lumens for 5 hours. Program your modes: The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes. Charge your devices: Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. - Light output: 450 Lumens - Power bank: 2200 mAh - Dimensions: 122 x 30mm - Weight: 115g - What's in the pack: Light, Silicone Strap, USB Cable, Hex Key
Page 1 of 3 Next page