Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Electronics

PowerTap C1 Chainrings w/Sensor
$700.00
The C1 chainring is a full featured, crank-based power meter that features dual-sided measurement. The FSA-made, one-piece chainring design provides added stiffness for shifting no matter the terrain. Available in 53/39, 52/36 and 50/36 chainring tooth options for 5 bolt, 110 BCD cranks, the C1 mounts to existing hardware on the bike. Additionally, dual band ANT+ and Bluetooth SMART connectivity make the C1 an obvious choice for riders looking for more features and better value.
Stages Cycling Cannondale Hollowgram Si
$579.99
This Stages Power meter is built on to a non-drive Cannondale Si crank arm specifically to pair with Cannondale's Hollowgram Si crank — 2014 or newer. The Stages Power meter will also mate to the Hollowgram SISL2 model crank. This Stages Power meter is slimmer and up to 28% lower profile than their original meter. It's also sleeker, with a 17-percent reduction in frontal area, and they've made it stronger. The housing design increases the strength of the battery door and housing connection by 200-percent over the previous design. - Accuracy: ± 2% - Weight: Only adds 20gr to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Stages Support section - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Training Peaks, Strava, Garmin Training Center and others
Garmin Edge 830 Sensor Bundle
$500.00
Performance GPS Cycling Computer with Mapping and Touchscreen - Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more - MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time - Cycling safety features include new bike alarm, group messaging and tracking, assistance and compatibility with Varia rearview radar and lights so you can see and be seen - includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus on-device route creation, off-course recalculation and back to start; integrated Trailforks data includes trail difficulty ratings - Customize with free apps widgets and data fields from the Connect iQ Store - Battery life: up to 20 hours with GPS; extendable up to 40 hours with the Garmin Charge power pack or in battery save mode - Speed sensor, Cadence sensor and Heart rate monitor Who cares that the Edge 830 touchscreen cycling computer puts trail maps and ratings at your fingertips and offers insights to help you improve? You do. So, whether you’re an enduro extremist, a black diamond expert or somewhere in between, Edge 830 is ready to tame the trails with you. In The Box - Edge 830 - Flush out-front mount - Standard mount - Speed sensor - Cadence sensor - Heart rate monitor - Tether - USB cable - Documentation
SRAM eTap AXS BlipBox
$385.00
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame
Wahoo ELEMNT ROAM GPS Bike Computer
$379.99
The Wahoo ELEMNT ROAM GPS bike computer is built for the ride. Its smart navigation features allow for on-device navigation including “Back on Track” re-routing which will get you to your destination even if you veer off course. The ELEMNT ROAM is the first Wahoo bike computer to include a color screen. When combined with the crystal-clear 2.7" Gorilla Glass display, it makes seeing your routes and data easier, so you can go back to focusing on your ride. The ELEMNT ROAM also includes an ambient light sensor, so the screen backlight and LED lights will automatically adjust based on lighting conditions both indoors and outdoors. With a longer battery life, you can explore for up to 17 hours before you need to recharge. The ELEMNT ROAM GPS bike computer makes it simple to explore—whether you need turn-by-turn directions or just want to find the fastest way home. Its on-device navigation features and powerful integrations are designed to help you roam with confidence. Lastly, the Roam is compatible with ANT+ Radar systems including the Garmin Varia—see the proximity of approaching vehicles on the screen in real-time. The Roam Bundle comes with the Roam GPS computer, TICKR heart rate chest strap, RPM Speed & Cadence sensors. - Unique to Wahoo, the integrated out-front mount creates a cohesive system of the ELEMNT ROAM unit and mount for a sleek look and smooth riding. - The thin, lightweight, and damage-resistant Gorilla Glass helps ELEMNT ROAM can stand up to the toughest conditions. - Automatically adjusts screen brightness and LED lights as lighting conditions change both indoors and outdoors. - Vibrant, crystal clear color 2.7" (68.6mm) display makes seeing your data and routes easier than ever. - A truly wireless bike computer with no plugin required (except to charge it)! There's no need to connect to your laptop to sync ride data, download maps, or update software. All of this can be done via WiFi, Bluetooth, or ANT+. - The free ELEMNT Companion App effortlessly guides you through a step-by-step set-up so that you can create customized user profiles, track performance, update maps and firmware, and share ride data effortlessly. - Integrated GPS with simple, crisp maps so you're ready wherever you are in the world.
Garmin Forerunner 610
$349.99
Garmin's touchscreen GPS-enabled Forerunner 610 is packed with vital data to help make you faster. It records pace, distance, keeps you up to speed with Garmin's Virtual Partner and Virtual Racer, and more. Vibration alerts can be programmed for time, distance, calories, and other key training metrics. GPS helps you find your way back with the "back to start" feature while ANT+ technology allows you to sync with compatible heart rate monitors and pedometers. Plus, you can wirelessly upload your workouts back at home to track and share your progress online with Garmin Connect.
Wahoo ELEMNT BOLT GPS Bike Computer Bundle
$329.99
Get everything you need to boost your cycling performance all at once! The ELEMNT BOLT features a patent-pending design that integrates the bike computer and mount, resulting in a CFD tested, highly aerodynamic system built to be on the front of your bicycle. Not to mention, it's super easy to set-up and customize with the free companion app and features dual-band technology, wireless connection & uploads, pre-loaded global maps and routes, and so much more. The TICKR heart rate monitor, RPM Speed sensor and RPM Cadence sensor pair seamlessly with the ELEMNT, so that you can get live and accurate performance metrics. Lastly, the Bolt is compatible with ANT+ Radar systems including the Garmin Varia—see the proximity of approaching vehicles on the screen in real-time. - The ELEMNT BOLT is the most integrated GPS bike computer on the market with a full list of compatible hardware and smartphone apps. - Two sturdy and secure mount options: an integrated out-front mount and a stem mount. - RPM Cadence comes with a crank and shoe mount. - RPM speed comes with a hub mount.
Bryton Aero 60T
$309.95
Aero 60 is Bryton's first Aerodynamic GPS Cycling Computer for road bikes. With precisely engineered dimple design wrapped around its back and the brand new Aero Mount developed as an integrated system to reduce air drag, Aero 60 not only provides powerful features, but it's also built to be highly aerodynamic so you can ride fast just like the wind. Aero 60 also comes with pre-loaded OpenStreetMap and full GNSS support, allowing you to follow planned trips under precise positioning. Features: - Aerodynamic design - Pre-installed OSM Map for easier guidance. - Supports electronic shifting systems of Di2 (Shimano), eTap (SRAM) and EPS (Campagnolo) - Workout planning via Bryton app - Supports TrainingPeaks workouts. - 2.3" b/w Large Display - Full GNSS Support GPS+Glonass+BDS+Galileo+QZSS - STRAVA and TrainingPeaks Auto Sync - Supports GoldenCheetah (PC software) Specs: - Display: 2.3 inches Mono LCD - Battery Hour: 32 Hours - GPS: High-Sensitivity Chipset - Waterproof: IPX7 - Alerts: Yes - Lap history: 130 laps - Log history: 300 hours - Heart rate zones: 7 zones - Operating Temperature: -10C° ~ 50C° - ANT+/BLE Sensor Support In The Box: - Aero 60 - Aero Mount - Smart Speed Sensor (ANT+/BLE) - Smart Cadence Senor (ANT+/BLE) - Smart Heart-Rate Monitor (ANT+/BLE) - USB Cable - Safety Lanyard - Quick-Start Guide
Garmin Edge 500
$250.00 - $299.99
Finally, a tool as vital as your bike itself. It will change the way you view riding by showing you your strengths, your weaknesses, where you're going, and where you've been. The sleek, slim Garmin Edge 500 is ideal for the avid racer and the weekend warrior alike—it displays basic data such as speed and distance, and it's compatible with ANT+ speed/cadence sensors, heart rate monitors, and power meters (sold separately), giving you the key to unlock your hidden potential. It's GPS-enabled, allowing you to download and analyze training files on programs like Garmin Connect and Strava. Get the most out of your valuable ride time with the Edge 500.
Bryton Rider 450T
$279.95
Reign over Peaks - Designed for mountain bike lovers, Rider 450 preloads OpenStreetMap with Full GNSS support, allowing you to find trails, locate yourself and know which way to go in a second. Bigger Display, Better View - Designed for your better viewing experience, Rider 450 is built with crisp black and white 2.3” large display, making reading data become easier than ever. It can fit up to 10 data per page for you to have better understanding of your real-time performance. Follow Track with OSM - With OpenStreetMap(OSM), Rider 450 provides a convenient and intuitive user experience for mountain bikers. You can find the trails, locate where you are and which direction you should go at a glance, making the rides smoother and more enjoyable. ESS Support - Rider 450 supports electronic gear-shifting systems including Shimano’s Di2, SRAM’s eTap and Campagnolo’s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 450, eliminating the need to manually check the crankset and cassette. ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors work perfectly with Rider 450 after simple pairing. Absolute Precision - Bryton's first GPS cycling computer with GNSS full support incorporates GPS, Glonass (Russia), BDS (China), Galileo (Europe) and QZSS (Japan) satellite systems, providing a much more reliable satellite coverage in any situation especially when there are buildings/trees or even while mountain biking, along with faster start-up. Supports up to 78+ Functions - Rider 450 provides rich data for you to fully grasp the performance of your ride. It incorporates up to 78+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power, HR and Di2. 32 Hours of Battery Life - If you love going on adventures whole day, Rider 450 certainly meets your needs. It provides up to 32 hours of battery life and allows you to charge via power bank while recording. TrainingPeaks Workout - To make training easier than ever, Rider 450 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks® and exported to the Rider 450 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals. Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 450 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Customizable Data Display via App Tailor your own data display with Bryton Active App! After pairing with Bryton Active App, you can customize your data fields/pages based on your training goals via BLE on your phone. It's super easy to use. Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. STRAVA, TrainingPeaks and Selfloops: Auto Sync - Compete with worldwide riders through Rider 450 recorded data.Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites. It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 450 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis. - ESS Support - ANT+/ BLE Sensors Support - 32 Hours of Battery Life Specifications: - Display: 2.3 inches Mono LCD - Battery Hour: 32 Hours - GPS: High-Sensitivity Chipset - Waterproof: IPX7 - Alerts: Yes - Lap history: 130 laps - Log history: 300 hours - Heart rate zones: 7 zones - Operating Temperature: -10C° ~ 50C° In the Box: - Rider 450 - Smart Speed Sensor - Smart Cadence Sensor - Smart Heart-Rate Monitor
Wahoo ELEMNT BOLT GPS Bike Computer
$229.99
ELEMNT BOLT is the first, fully aerodynamic GPS bike computer! Its patent-pending design creates an integrated system of computer and mount which results in a CFD (Computational Fluid Design) tested, highly aerodynamic system built to be on the front of your bicycle. Equipped with Bluetooth Smart and ANT+ dual-band technology, ELEMNT BOLT pairs seamlessly with all of your cycling sensors. It works with our free ELEMNT companion app which allows you to set up your data fields, customize profiles, track performance, and share ride data effortlessly—no more confusing menus! Plus, programmable LED QuickLook Indicators provide a quick way to see if you're on pace with important performance metrics like speed, heart rate, and power. Designed for performance and engineered for simplicity, the ELEMNT BOLT GPS bike computer helps make every second count. Lastly, the Bolt is compatible with ANT+ Radar systems including the Garmin Varia—see the proximity of approaching vehicles on the screen in real-time. - Wahoo worked with world-renowned aerodynamic cycling expert Dimitris Katsanis to create a performance-driven bike computer. Designed as a system, the ELEMNT BOLT unit and integrated out-front mount becomes a CFD tested, highly aerodynamic system that is built to be on the front of your bicycle. - Includes a locking screw that riders can use to secure the computer to the mount. When utilized, the ELEMNT BOLT may remain on the bicycle for weigh-ins for UCI races. - A truly wireless bike computer with no plugin required (expect to charge it)! There's no need to connect to your laptop to sync ride data, download maps, or update software. All of this can be done via WiFi, Bluetooth, or ANT+. - The free ELEMNT Companion App effortlessly guides you through a step-by-step set-up so that you can create customized user profiles, track performance, update maps and firmware, and share ride data effortlessly. - Integrated GPS with simple, crisp maps so you're ready wherever you are in the world. - 2.2" (56mm) diagonal display size that is larger than the leading competitor, so all your data and routes are easy to see. - There's a page for every element of your ride: a workout view with a complete look at performance metrics, a climbing view to track ascents in real-time, a map view to stay on course, live tracking, and more. All screens are fully customizable from within the ELEMNT Companion App. - Two sturdy and secure mounting options—aerodynamic out-front and stem—so that you can see your ride where you want.
Garmin Forerunner 210
$199.99
Accuracy and simplicity make Garmin's Forerunner 210 a favorite among the world's best runners. It keeps track of time, distance, speed, effort, and your route, thanks to its built-in GPS. It works indoors and out, and is compatible with some indoor fitness equipment. When you're done with your workout, you can log it on Garmin Connect.
Lezyne Mega C GPS
$199.99
Highlighted by a large, 2.2-inch, 240x320 high-resolution color screen, the new Mega C contains all the features serious road, gravel and mountain bike riders and racers as well as long distance adventure riders require. Color graphics help you quickly and easily identify specific data fields and target training zones. - Optimized, easy to read color display with backlight - Durable, composite construction - Super accurate, advanced data recording system combines GPS plus Glonass satellites - Simultaneous ANT+ and Bluetooth Smart connectivity - Multiple real-time features when paired to the Lezyne Ally app - Barometer and accelerometer - Simple setup through Lezyne Ally phone app - Import .tcx and gpx files - Trainer Mode - Multiple bike profiles - Full navigation - Custom route building - Intuitive four button operation - Lithium polymer battery provides up to 32 hours of runtime - Micro USB rechargeable - Stores up to 800 hours of ride data - Customizable fields and page count (up to 8 fields) - On screen preloaded maps - Custom alerts and auto presets - Extremely weather resistant - Includes X-Lock Standard Mount
Bryton Rider 450E
$199.95
Rider 450 is a powerful GPS Cycling Computer. On top of all the features of the Rider 410, Rider 450 comes pre-loaded with OpenStreetMaps, providing useful location info while cycling. With Full GNSS support, it can record your ride precisely no matter where you are riding, and it's Follow Track and WLAN Data Sync features will make you love it even more! Reign over Peaks - Designed for mountain bike lovers, Rider 450 preloads OpenStreetMap with Full GNSS support, allowing you to find trails, locate yourself and know which way to go in a second. Bigger Display, Better View - Designed for your better viewing experience, Rider 450 is built with crisp black and white 2.3” large display, making reading data become easier than ever. It can fit up to 10 data per page for you to have better understanding of your real-time performance. Follow Track with OSM - With OpenStreetMap(OSM), Rider 450 provides a convenient and intuitive user experience for mountain bikers. You can find the trails, locate where you are and which direction you should go at a glance, making the rides smoother and more enjoyable. ESS Support - Rider 450 supports electronic gear-shifting systems including Shimano’s Di2, SRAM’s eTap and Campagnolo’s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 450, eliminating the need to manually check the crankset and cassette. ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors work perfectly with Rider 450 after simple pairing. Absolute Precision - Bryton's first GPS cycling computer with GNSS full support incorporates GPS, Glonass (Russia), BDS (China), Galileo (Europe) and QZSS (Japan) satellite systems, providing a much more reliable satellite coverage in any situation especially when there are buildings/trees or even while mountain biking, along with faster start-up. Supports up to 78+ Functions - Rider 450 provides rich data for you to fully grasp the performance of your ride. It incorporates up to 78+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power, HR and Di2. 32 Hours of Battery Life - If you love going on adventures whole day, Rider 450 certainly meets your needs. It provides up to 32 hours of battery life and allows you to charge via power bank while recording. TrainingPeaks Workout - To make training easier than ever, Rider 450 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks® and exported to the Rider 450 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals. Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 450 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Customizable Data Display via App Tailor your own data display with Bryton Active App! After pairing with Bryton Active App, you can customize your data fields/pages based on your training goals via BLE on your phone. It's super easy to use. Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. STRAVA, TrainingPeaks and Selfloops: Auto Sync - Compete with worldwide riders through Rider 450 recorded data.Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites. It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 450 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis. Specifications: - Display: 2.3 inches Mono LCD - Battery Hour: 32 Hours - GPS: High-Sensitivity Chipset - Waterproof: IPX7 - Alerts: Yes - Lap history: 130 laps - Log history: 300 hours - Heart rate zones: 7 zones - Operating Temperature: -10C° ~ 50C° In the Box: - Rider 450 - Bike Mount - USB Cable - Quick-Start Guide
Giant NeosTrack GPS Computer
$189.00
Designed with help from the riders of Team Sunweb, the all-new NeosTrack GPS Cycling Computer is engineered to provide riders with the information they need to push the limits of performance. With integrated FTP/LTHR test protocols, Auto-Sync capabilities, and even turn by turn route guidance, the NeosTrack is your pocket-sized training partner. What’s more, NeosTrack boasts a battery life of up to 33 hours on a single charge and features Bluetooth technology to seamlessly connect with smartphones. It also features ANT+ technology for compatibility with most ANT+ power meters and training sensors currently available in the market. Features - High-sensitivity GPS receiver - Easy Setup with the NeosTrack App - Real-time Di2 gearing, gear ratios and battery charge level - Auto-sync with TrainingPeaks - Turn by turn guidance - Integrated FTP/LTHR testing protocols - Large easy-to-read 2.6” LCD Anti-glare display - Battery life of up to 33 hours on a single charge - IPX7 waterproof protection
Garmin Edge 25
$169.99
Go the extra mile. Edge 25 captures essential ride stats, including time, distance, speed, total ascent and location. When paired with a heart rate strap (sold separately), it records your heart rate and heart rate zone so you’ll know when you hit your target (also providing more accurate information on calories burned during your ride). Edge 25 offers all the necessary stats to take your ride to the next level. Small in size, yet packed with features such as smart notifications when paired with a smartphone. Choose from courses ridden by others or create your own on Garmin Connect, Garmin's free online community. Once you choose a course, upload it directly to Edge 25 and follow it to your destination. You can even compete against yourself to make it more interesting. Via Bluetooth with your smartphone or a simple connection to a computer, you can upload your activities to Garmin Connect and see the path you traveled on a map, analyze it, share it and view details. Bluetooth also allows Live Tracking, so friends and family can follow your ride in real time. Invite followers using email or social media, which lets them view your live data on Garmin Connect. Compete against other cyclists on Garmin Connect segments and see your results post-ride on the leaderboard. Includes on-device alerts for segment start/finish points. Edge 25 lets you know how fast/far you’re riding. ANT+ sensors (sold separately), let you track cadence, as well as indoor speed and distance. Edge 25 uses GPS/GLONASS satellites to track how far/fast and where you ride, even under dense tree cover. Unlike a phone, you can use Edge 25 for up to 8 hours without worrying about data or battery drainage. - Tracks time, distance and speed, and heart rate ((heart rate transmitter sold separately) - Plan, download and follow new rides - Save, plan and share your activities at Garmin Connect - Water-resistant, durable device - Connected features, for instant data upload and LiveTrack
Lezyne Super Pro GPS
$149.99
The completely redesigned Super Pro GPS cycling computer is an excellent choice for all riders looking for a full-featured, mid-sized device. New styling gives the device an enhanced look and feel, and it can be rotated horizontally for those that prefer a landscape view. Its screen has improved resolution and contrast and it now features a map page for a much better navigation experience. The device's firmware has been updated to show more data fields and it can now pair with our "Smart Connect" LED system. And its charging USB port has been upgraded to be much more water resistant. The Super Pro GPS is both Bluetooth and ANT+ compatible and can connect with power meters, heart rate sensors, speed and/or cadence sensors, smart trainers and wireless drivetrains. When paired with our Lezyne Ally phone app, the following features can be activated: full navigation capabilities, phone notifications, Lezyne Track (live tracking), Strava Live Segments, training integration and device customization. It features a GPS/Glonass chipset, in addition to an integrated barometer and accelerometer, for superior data recording and elevation readings. And it offers up to 28-hours of battery run-time. Features - Durable, composite construction - Super accurate, advanced data recording system combines GPS plus Glonass satellites - Simultaneous ANT+ and Bluetooth Smart connectivity - Multiple real-time features when paired to the Lezyne Ally app - Barometer and accelerometer - Simple setup through Lezyne Ally phone app - Import .tcx and gpx. Files - Trainer Mode - Multiple bike profiles - Full navigation - Custom route building - Intuitive four button operation - Lithium polymer battery provides up to 28 hours of run-time - Micro USB rechargeable - Stores up to 400 hours of ride data - Customizable fields and page count (up to 8 fields) - On screen preloaded maps - Custom alerts and auto presets - Extremely weather resistant - Includes X-Lock Standard Mount Specs - Weight: 60g - Runtime: 28 hours - Memory: 400 hours max - Dimensions: Computer 70.6mm (W) x 48.16mm (L) x 26.0mm (H) - Screen: 32.6mm (W) x 39.8mm (L) CONNECTIVITY: - NEW: FE-C Trainer compatibility - NEW: Smart Connect compatible - Receive text, email, phone call and message app notifications when paired to smartphone - Sync rides via Bluetooth Smart to the Lezyne Ally phone app - Instant download of ride files (.fit) via plug-and-play flash drive technology (Windows/Mac) and upload directly to GPS Root website for ride analysis - Auto-sync to Strava, TrainingPeaks and Today's Plan - Pairs with Bluetooth Smart or ANT+ enabled heart rate monitors, cadence/speed sensors and power meters - Connects with compatible electronic drivetrains - Turn-by-turn navigation - Off-line maps and rerouting - Follow starred Strava segments and routes - Follow structured workouts from Today's Plan and TrainingPeaks DISPLAY DATA - Map - Turn-by-turn navigation - Live Tracking icon - Strava Live Segments - Structured Workout - Heart Rate*: Current, Average, Max. - Cadence*: Current, Average - Power* (6 data display options) - Training Specific Fields: TSS, NP, IF - Electronic drivetrain data - Speed: Current, Average, Max. - Distance: Current, Trip Total, Trip 2, Odometer - Time: Ride Time, Clock - Date - Laps and lap averages - Elevation: Ascent, Descent, Current - Grade - Calories - Temperature - GPS signal strength - Battery life indicator for device and paired devices - Connected devices icons - Bread crumb trail page
Bryton Rider 410E
$149.95
Rider 410 is Bryton's first GPS bike computer with FULL Global Navigation Satellite System support, providing faster acquisition and more precise positioning than ever before. It's 2.3" large display allows you to view 8 data at a glance, so you can train more efficiently. Rider 410 also supports both ANT+ and BLE activity sensors for maximum compatibility. Engineered for cycling lovers all over the world! Simply Precise - Designed for riders' best convenience, Rider 410 incorporates FULL Global Navigation Satellite System, allowing you to get GPS fixed much faster and have more precise positioning, and it gives maximum compatibility by working perfectly with both ANT+ and BLE sensors. Bigger Display, Better View - Designed for your better viewing experience, Rider 410 is built with crisp black and white 2.3” large display, making reading data become easier than ever. It can fit up to 8 data per page for you to have better understanding of your real-time performance. Absolute Precision - Bryton's first GPS cycling computer with GNSS full support incorporates GPS, Glonass (Russia), BDS (China), Galileo (Europe) and QZSS (Japan) satellite systems, providing a much more reliable satellite coverage in any situation especially when there are buildings/trees or even while mountain biking, along with faster start-up. ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors work perfectly with Rider 410 after simple pairing. Customizable Data Display via App - Tailor your own data display with Bryton Active App! After pairing with Bryton Active App, you can customize your data fields/pages based on your training goals via BLE on your phone. It's super easy to use. Supports Up to 72+ Functions - Rider 410 provides rich data for you to fully grasp the performance of your ride. It incorporates up to 72+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR. 35 Hours of Battery Life - If you love riding long distance on roads, Rider 410 certainly meets your needs. It provides up to 35 hours of battery life and allows you to charge via power bank while recording. Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 410 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. STRAVA, TrainingPeaks and Selfloops: Auto Sync - Compete with worldwide riders through Rider 410 recorded data.Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites. It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 410 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis. - 2.3" b/w Large Display - 35 hours of battery life. - Full GNSS Support GPS+Glonass+BDS+Galileo+QZSS - Smart Notifications - Customizable Data display via Bryton App. - ANT+/BLE dual band support. - Supports GoldenCheetah (PC software) - Supports up to 72+ functions - Built in barometer for altitude - Supports power meter - Bluetooth smart for quick and easy data transfer - STRAVA and TrainingPeaks Auto Sync Specifications: - Display: 2.3 inches Mono LCD - Battery Hour: 35 Hours - GPS: High-Sensitivity Chipset - Waterproof: IPX7 - Alerts: Yes - Lap history: 130 laps - Log history: 300 hours - Heart rate zones: 7 zones - Operating Temperature: -10C° ~ 50C° In the Box: - Rider 410 - Bike Mount - USB Cable - Safety Lanyard - Quick-Start Guide
Wahoo Bike Pack
$129.99
With Wahoo's Bike Pack, you can pair any bike sensor through ANT+ wireless technology with your favorite cycling app to see speed, cadence, power, distance, GPS maps, and more. It includes Wahoo's Bike Case and Speed/Cadence sensor. Wahoo's Bike Cases protect and transform your iPhone into a powerful cycling computer: • Protects your iPhone: IPX5 waterproof certification and rugged shock resistant construction • Mounts your iPhone to handlebars or stem while you ride • Compatible with Wahoo Extended Battery and Wahoo Aerobar Mount (sold separately, not compatible with PROTKT) • Works with all types of bikes - road, mountain, e-bikes, and hybrid • Fully accessible and functional touch screen • Low-energy and does not require charging • Weight: Bike Cases: 128 grams, S/C Sensor: 30 grams
Shimano BMDN100 Di2 Long Battery Mount for External Wiring
$124.99
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
CatEye Strada Digital Double Wireless w/cadence
$120.00
Become more efficient than ever with CatEye's Strada Digital Double Wireless. Wireless communication between the computer and speed/cadence sensor keeps your efforts dialed, your rhythm flowing smoothly, and your bike looking simple and clean. Other key features include auto start/stop so you get accurate ride time, plus a backlight for easy viewing during low-light rides. The Strada is a perfect tool for both racing and training and can easily be switched between bikes.
SRAM RED eTap Bar End Clic Shift Buttons
$120.00
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
CatEye Padrone Digital Double
$110.95
Meet your perfect riding & training partner. FEATURES - Large, 3-row screen with up to four data displays - Upgradable to triple wireless with the optional heart rate sensor - Compatible with Bluetooth SMART sensors - Automatic sensor and tire recognition applicable to multiple bikes - ClickTec button interface - Auto start / stop - Pace arrow - Programmable display - Sensor battery alarm - Programmable odometer - Setup on menu screen or with smartphone app Cateye Cycling - Import a summary of ride data and upload to CATEYE Atlas, Strava and TrainingPeaks via Cateye Cycling app - FlexTight universal bracket FUNCTIONS - Current / average / maximum speed - Current / average / maximum cadence - Current / average / maximum heart rate (optional) - Total distance - Trip distance 1 & 2 - Moving time - Clock TECH SPECS - Current speed: 0.0(4.0)~105.9km/h [0.0(4.0) - 65.8 mph] - Average speed: 0.0~105.9km/h [0.0(4.0) - 65.8 mph] - Maximum speed: 0.0(4.0)~105.9km/h [0.0(4.0) - 65.8 mph] - Total distance: 0.0~99999.9/100000-999999km - Trip distance 1: 0.00~999.99km - Trip distance 2: 0.00~9999.99/10000.0~99999.9km - Moving time: 0:00'00"~99:59'59" - Current cadence: 0(20)~255rpm - Average cadence: 0~255rpm - Maximum cadence: 0(20)~255rpm - Current heart rate: 0(30)~255bpm * - Average heart rate: 0~255bpm * - Maximum heart rate: 0(30)~255bpm * - Wireless transmission: Bluetooth Smart - Clock: 0:00'~23:59' [1:00'~12:59'] - Pace arrow: Yes - Auto power saving: Yes - Auto start/stop: Yes - Auto sensor recognition : Yes - Tire size: 100mm~3999mm (default:2096mm) - Compatible sensors: CatEye brand HR-12 Heart Rate sensor * Also works with other brand Speed, Cadence and/or Heart Rate sensors conforming to Bluetooth4.0 CSCP/HRP/CPP Battery - CR2032 X1 - Life: Computer - Approx 4 months), Speed sensor - Approx 5 months Dimension / Weight: - Computer:67.5 x 43 x 15.6mm / 30grams - Speed sensor:70.4 x 86.3 x 23.5mm / 19.2grams
SRAM RED eTap Blips
$110.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
Shimano BT-R1A External Di2 Battery
$110.00
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
BiKASE Tablet Stand
$99.99
The Tablet Stand from BiKASE is a freestanding Tablet holder designed for indoor training. In order to take advantage of the many sizes of bikes and heights of riders, the Tablet Stand uses a telescoping tripod design to accommodate any rider. On top of the height adjustment, the tablet clamp can rotate a full 360°. Don't let you tablet go to waste during your grueling training sessions! Put it to work with the tablet stand from BiKASE. Features: - Works with iPad Mini, iPad, Surface and most tablets. - Telescoping stand - Full rotation - Comes with carrying bag
CycleOps PowerCal Power Meter
$99.99
Now you can measure your power output without replacing any components on your bicycle! CycleOps' PowerCal gives you real-world and real-time data via a convenient chest strap. It's compact, light, and easy to bring along on every ride and on any bike so you get consistent training metrics. After the initial setup, the PowerCal uses complex scientific algorithms based on your heart rate to send accurate power data to your ANT+ compatible head unit (sold separately) so you can maximize every training session. And, because it's attached to you and not your bike, you can use the PowerCal to track progress across multisport training disciplines as well.
Lezyne Macro Plus GPS
$99.99
The Macro Plus GPS is the perfect device for casual to serious cyclists that just need the main essentials of a cycling GPS computer. New features include an optional horizontal orientation, an improved water-resistant plug and enhanced styling. Its hardware and firmware have also been improved with a higher-resolution screen and the ability to connect with our "Smart Connect" LED system. In addition to its full GPS recording capabilities, it fully ties in with our GPS platform when paired with our GPS Ally phone app. When paired, the device offers full turn-by-turn navigation, phone notifications, Lezyne Track (live tracking), Strava Live Segments, training integration and device customization. Additionally, the Macro Plus GPS can pair with external Bluetooth sensors. And it offers up to 28-hours of battery run-time. Features - Durable, composite construction - Optimized GPS satellite recording - Bluetooth Smart connectivity - Multiple real-time features when paired to the Lezyne Ally app - Simple setup through Lezyne Ally phone app - Import .tcx and gpx. Files - Trainer Mode - Multiple bike profiles - Full navigation - Custom route building - Intuitive four button operation - Lithium polymer battery provides up to 28 hours of run-time - Micro USB rechargeable - Stores up to 100 hours of ride data - Customizable fields and page count (up to 8 fields) - Custom alerts and auto presets - Extremely weather resistant - Includes X-Lock Standard Mount Specs - Weight: 60g - Runtime: 28 hours - Memory: 100 hours max - Dimensions: Computer 70.6mm (W) x 48.16mm (L) x 26.0mm (H) - Screen: 32.6mm (W) x 39.8mm (L) Connectivity - NEW: Smart Connect compatible - Receive text, email, phone call and message app notifications when paired to smartphone - Sync rides via Bluetooth Smart to the Lezyne Ally phone app - Instant download of ride files (.fit) via plug-and-play flash drive technology (Windows/Mac) and upload directly to GPS Root website for ride analysis - Auto-sync to Strava, TrainingPeaks and Today's Plan - Pairs with Bluetooth Smart enabled heart rate monitors, cadence/speed sensors and power meters - Turn-by-turn navigation - Off-line rerouting - Follow starred Strava segments and routes - Follow structured workouts from Today's Plan and TrainingPeaks Display Data - Turn-by-turn navigation - Live Tracking icon - Strava Live Segments - Structured Workout - Heart Rate: Current, Average, Max. - Cadence: Current, Average - Power (6 data display options) - Training Specific Fields: TSS, NP, IF - Speed: Current, Average, Max. - Distance: Current, Trip Total, Trip 2, Odometer - Time: Ride Time, Clock - Date - Laps and lap averages - Elevation: Ascent, Descent, Current - Calories - Temperature - GPS signal strength - Battery life indicator for device and paired devices - Connected devices icons - Bread crumb trail page
Bryton Rider 15C
$99.95
Rider 15 comes with built-in GNSS receiver for improved accuracy plus an all new Heading feature along with 16 hours of battery, smart notifications and support for up to 30 functions. Best of Both Worlds - Power On and Go with button behavior consistent with traditional bike computers and the ease and convenience of tracking workouts and sharing via Bryton Active App, like that of other training apps. Rider 15 is The Best of Both Worlds. Absolute Precision - Bryton's first GPS cycling computer with GNSS full support incorporates GPS, Glonass (Russia), BDS (China), Galileo (Europe) and QZSS (Japan) satellite systems, providing a much more reliable satellite coverage in any situation especially when there are buildings/trees or even while mountain biking, along with faster start-up. Heading to Your Goal - 2 Heading modes available, the Compass Mode for pointing to the North and the Map Mode for pointing to current direction. Enhanced 2“ High-Contrast Display - With all new display design, Rider 15 displays up to 4 cycling data per page (3 customizable data + Heading) with 5 pages total, allowing cyclists to have their current workout status well in hand. Power On and Go - No need to adjust wheel size or bother with installation and pairing with speed sensors. Just mount the device on the handle bar, turn it on and you are good to go. 16 Hours of Battery Life - Rider 15 provides a long battery life, enough for workouts with up to 16 hours. It also supports mobile power bank, allowing you to charge while recording. Supports Up to 30 Functions - Rider 15 supports fully customizable data pages with 30 real time data functions, including Time, Speed, Distance, Heading, Calorie, Cadence, Altitude, HR and LTHR, allowing you to be always on top of your workouts. Smart Notifications - Rider 15 receives smart notifications, which includes email, call, and text during workouts after pairing with Bryton Active App via BLE. (available on iOS and android phones). BLE Auto Sensor Display 2.0 - Rider 15 automatically adjusts its data field display when paired BLE sensors are detected. Additionally, when a sensor is running low on battery, its data on the display blinks as a notification reminding you to charge it, keeping you ready for your next workout. Customizable Data Display via App - You can customize your data fields/pages based on your training goals using Bryton Active App via BLE, it's super easy to use! Auto Backlight - Based on the longitude and latitude of your location, backlight function will be activated before sunset automatically, allowing you to ride wherever and whenever. Know Your Altitude - With built-in barometer, Rider 15 displays complete altitude data for your current location, allowing you to observe altitude and temperature difference and make adjustment accordingly. Rider 15 makes it easy for you to calibrate altitude. After simple pairing with Bryton Active App, you can simply calibrate altitude on your phone. STRAVA, TrainingPeaks and Selfloops: Auto Sync - No software is needed to convert files. Workout files are automatically saved in FIT format, which can be uploaded to popular training sites. We also make it super easy for you to sync your activities from your Bryton Active App to Strava/TrainingPeaks/Selfloops automatically by connecting your accounts. Sync to Bryton Active App - Enjoy the seamless over-the-air synchronization with all new Bryton Active App. Your workout data can be synced via BT from the device to Bryton Active App, where you can view progress, graphical analysis and share rides on social media. With simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier for you to share your activities and compare with millions. Specifications: - Display: 2 inches Segment Type HTN LCD - Battery Hour: 16 Hours - GPS: High-Sensitivity Chipset - Waterproof: IPX7 - Alerts: Yes - Log history: 30 hours in one sec mode, 120 hours in smart recording mode. - Heart rate zones: 7 zones - Operating Temperature: -10C° ~ 50C° - BLE Sensor Support In the Box: - Rider 15 - Smart Cadence Sensor - Bike Mount - USB Cable - Quick-Start Guide
KMC Digital Chain Checker
$99.00
KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body
Page 1 of 5 Next page